When your siding needs work — whether it's a full replacement, storm damage, or a long-overdue upgrade — our Arlington, WA crews show up prepared, price it fairly, and get it done right. No guesswork, no hidden fees.
What separates our Arlington operation from the competition isn't a slogan — it's the fact that every estimate we write is signed by a licensed contractor, every project has a named lead installer accountable for the outcome, and every job site is cleaned before we leave at night.
Our Arlington, WA teams operate on a tight scheduling protocol: we don't book jobs we can't start within a reasonable window, we communicate proactively if anything in the timeline shifts, and we don't consider a project closed until the customer signs off on the walkthrough.
Licensed, bonded, and carrying full general liability plus workers' compensation in WA — not because it's optional, but because those protections matter for homeowners who invite a crew onto their property. Ask for our certificate of insurance before signing anything; we provide it without hesitation.
Most siding problems start small and quiet — a missed fastener, a failed caulk joint, a crack that looks cosmetic. By the time interior moisture damage appears, the repair scope has usually doubled. Watch for these early signals.
Cracked panels aren't just cosmetic — they're open invitations for moisture infiltration. Any crack that reaches through the panel face needs attention.
Water staining on drywall near exterior walls is one of the clearest indicators of a failed building envelope. By the time interior damage is visible, moisture has usually been active behind the cladding for weeks or months.
Buckled panels rarely fix themselves. The deformation increases with each heat cycle, and the gap at the panel lock grows. This is one of those issues that gets significantly more expensive if ignored.
Paint peeling from the outside isn't always a paint problem — it's frequently caused by moisture migrating through the panel from the unpainted back face. Re-painting without addressing the back-face moisture cycle just delays the failure.
Fastener issues are quiet until they're catastrophic. A section that blows off in a windstorm — and the water damage that follows — costs far more to fix than a fastener re-drive.
Failing siding, missing housewrap, or compromised flashing at penetrations significantly reduces wall R-value and allows air infiltration. If your heating and cooling costs have climbed without a clear explanation, the building envelope is a legitimate suspect.
Our Arlington, WA team handles the full range of residential and commercial cladding work, from single-panel repairs to complete building envelope re-siding.
New siding installation covers everything from the housewrap to the trim: starter strip, flashing at all penetrations, panel installation per manufacturer spec, and finishing trim at corners, windows, and the roofline. We work on new construction alongside GCs and handle full tear-off replacements on existing homes. Our Arlington, WA crews are certified on vinyl, fiber cement, engineered wood, and steel panel systems — and we carry each product's installation manual on every job.
For insurance-related repairs, we produce a detailed damage documentation package — panel-level photos, square footage by elevation, material specifications — formatted for adjuster review. We've worked with every major carrier operating in WA and understand what documentation a claim requires.
Each cladding material has its own installation requirements, failure modes, and maintenance profile — and a crew that treats them all identically is a crew that will make material-specific mistakes. Our Arlington, WA specialists understand fiber cement's silica cutting protocols and back-priming requirements, vinyl's thermal expansion characteristics and lock-engagement tolerances, and wood's moisture content sensitivity and end-grain sealing needs. We don't sell you a product and then install it generically.
Commercial cladding projects in Arlington, WA operate on different constraints than residential work: higher fastener schedules for wind-load compliance, special inspection requirements in some jurisdictions, tighter sequencing requirements with other trades, and often a need for resident or business-continuity scheduling coordination on occupied buildings. Our commercial Siding crews are familiar with the permitting landscape in WA and have completed projects ranging from 10-unit townhome communities to larger multi-family re-siding contracts.
Siding doesn't end at the wall panels. Soffit, fascia, corner posts, J-channel, window and door trim, and all penetration accessories are part of the building envelope — and failing trim is one of the most common moisture entry points we encounter. Our Arlington, WA crews handle the complete trim system as part of every installation, not as an optional add-on. Vinyl soffit and fascia wrap, HardieTrim boards, and aluminum-capped fascia are all in our scope.
A professional siding inspection before buying or selling a Arlington, WA property gives you panel-level condition documentation that general home inspectors can't produce. We use calibrated moisture meters, close-range panel assessment, and caulk probe testing to generate a written report with photo documentation and a priority-ranked deficiency list. Pre-purchase inspections have identified sheathing moisture damage on properties where the general inspection reported the siding as "functional."
There are plenty of siding contractors in WA. Here's what separates the ones worth hiring from the ones who cost you twice — once for the job and once for fixing what they did wrong.
Our written estimates don't disappear after the handshake. They become the contract, and the final invoice reflects the estimate scope. If something changes, we issue a written change order before doing additional work.
Our WA dispatch operates from locally based crews — not a regional office routing jobs to whoever's available statewide. That means faster arrival windows, familiarity with local permit offices, and crews who understand Arlington, WA building code requirements.
Our WA contractor license number is provided at first contact. Look it up in the state database before signing anything — we encourage it. We carry current general liability and workers' compensation; certificates are available on request.
A warranty that isn't in writing isn't a warranty. Ours is a document you can file, reference, and enforce.
We sweep for fasteners and nails every afternoon before leaving, protect landscaping and driveways with staging tarps, and haul debris off-site rather than leaving a roll-off on your driveway for weeks.
Every Forge Siding project in Arlington, WA closes with a documentation package: permit records, manufacturer warranty registrations, post-project photos by elevation, and our workmanship warranty. That file is useful for insurance claims, home sales, and HOA records long after the project ends.
A predictable process reduces stress and produces better results. Here's exactly what happens when you contact our Arlington, WA team.
Your first call goes to a real dispatcher who asks the right questions. We arrive at the site assessment with the tools to measure, probe for moisture, and give you an accurate picture of what the project actually involves.
The estimate is a document, not a handshake. It lists every component — panels, trim, housewrap, fasteners, labor, permit fees — so you know exactly what's included before signing.
Material is ordered against the confirmed schedule. We don't start jobs with missing material. Your crew arrives on day one with everything staged and a clear sequence plan for the project.
The lead installer contacts you each morning to confirm the day's scope and each afternoon to report what was completed. If the inspection uncovers unexpected substrate conditions, you hear about it same-day with a written change order before we touch anything additional.
At project completion, we walk every elevation with you, confirm every scope item is complete, and hand over the close-out package: permit records, manufacturer warranty registrations, post-project photos, and our written workmanship warranty. Final payment is collected after the walkthrough sign-off — not before.
If our workmanship doesn't meet the standard we committed to in writing, we come back and make it right at no additional charge. That's not a marketing statement — it's the language in our warranty document, signed at project close. Our Arlington, WA clients get a document they can actually reference, not a slogan.
Call +1-844-782-0929 to Get StartedThree bids, three different approaches. Forge Siding was the only contractor who showed up with a moisture meter at the estimate visit and flagged elevated readings behind our north-facing panels before we even discussed product. That kind of diagnostic thoroughness sold us immediately.
The estimate they provided was the most detailed written document I've received from any contractor in 20 years of homeownership. Line items for every material component, labor broken down by scope, permit fee listed separately. No surprises when the final invoice came.
Pre-purchase inspection on a property we were considering saved us from a significant surprise. Forge Siding found sheathing moisture on two wall sections that the general home inspector had noted as "siding in acceptable condition." The seller ended up crediting the repair cost. That inspection paid for itself many times over.
Fiber cement installation — the back-priming, the fastener schedule documentation, the warranty registration process — was handled exactly as the manufacturer requires. Our close-out package has the Preferred Contractor registration and the complete fastener log. The 30-year warranty is in force.
The crew found rotted sheathing on the west wall during tear-off. Called me immediately, showed me exactly what they found with photos, and gave me the change order before touching anything. The whole process was transparent from start to finish — that's exactly how contractors should handle unexpected conditions.
I verified their license number in the state database before signing. Current, no disciplinary history. That two-minute check told me this was a contractor operating transparently. Everything about the project execution matched that first impression.
Forge Siding provides residential and commercial Siding across the full Arlington, WA service area from our local Arlington dispatch base. We're familiar with local building codes, permit requirements, and contractor licensing standards across WA — no learning curve on your project, no out-of-area crew navigating unfamiliar conditions on their first day.
Currently active in: 98223 and surrounding areas
Reach our Arlington dispatch line for fast scheduling, honest pricing, and a crew that actually shows up when they say they will.
📞 +1-844-782-0929 — Talk to a Specialist